Glass Drills
The Original Baldwin Tripod BM#3 Drill Press
1 YEAR WARANTEE
– 0-1300 rpm variable speed A/C motor
– Drills holes up to 7 inch diameter
– 3/8 chuck capacity
– Solid steel legs
– Cast iron base
All ball-bearing construction (double sealed) The original Baldwin Tripod Drill Press: often copied but never duplicated. Introduced to the glass industry by Baldwin Machine Works over sixty years ago, it is still the most widely used drilling machine in the industry. Available as a variable-speed or a single-speed machine. The variable-speed machine is for use with all steel, brass and diamond-core drills (1300 rpm), as well as spear point and prismatic carbide drills (400-600 rpm.) The single-speed machine is for use with steel, brass and diamond-core drills only. The drill can easily be positioned over any area to be drilled. Special soft, concave, rubber feet hold machine firmly to the drilling surface. Easy to use depth adjustment, the drill housing moves up and down on four, double-sealed ball bearings. Light weight and portable, this drill press can be used at the shop or on the job site. Weighs only 25 lbs.
Cost
$720.00 plus shipping
To Order: Email Rob@rgandassoc.com or Fax to 866-251-9079
The Original Baldwin BM#41 Suction Cup Drill Press
– 1 YEAR WARANTER WARANTEE
– 0-1300 rpm variable speed a/c motor
– Drills holes up to 5″ diameter
– 3/8 chuck capacity
– All ball bearing construction, double sealed
First introduced to the glass industry over 50 years ago, the original Baldwin BM41 Suction Cup Drill Press was the first drilling machine to use a suction cup to attach itself to the work. Drill holes up to 5″ in diameter. For use with all steel, brass, and diamond-core drills, as well as spear point and prismatic carbide drills. The drill housing moves smoothly up and down on four, double-sealed ball bearings. The 5″ suction cup is powered by an eccentric assembly that gives it more than twice the holding power of a simple-lever, suction cup machine. This provides the stability needed for proper drilling. Lightweight and portable, this drill press, which weighs only 15 lbs., can be used at the shop or on the job site.
Cost
$625.00 plus shipping
To Order: Email Rob@rgandassoc.com or Fax to 866-251-9079
The Baldwin Portable BM#41S Swivel Drill Press
– 1 YEAR WARANTEE
– Drills outlet cutouts without repositioning
– Built in retaining ring
– Rubber coolant plug
– 3/8 chuck capacity
– 0-1300 rpm variable speed a/c motor
The Baldwin portable swivel drill is designed primarily to make cutouts for plug and switch receptacles. The center of a 2″x 4″ cutout is marked in the base for easy alignment. The Swivel feature allows you to drill one hole, then by swiveling the head and plugging the first hold a second hole can be drilled without repositioning the machine. It can also be used for drilling holes up to 5″ in diameter by swiveling the drill to either side or to the rear of the machine. The machine swivels on a 2″ bronze bushing and is locked in place with a threaded brass rod when drilling. The drill housing moves smoothly up and down on four, double sealed ball bearings. There is a built in cooling retaining link made of solid pure gum rubber that will give many years of dependable service. The suction cup is powered by an eccentric assembly that gives more than twice the holding power of simple lever suction cup machines. This provides the stability needed for proper drilling. Weighs only 19 lbs.
***For use with all diamond, brass and steel core drills as well as spearpoints and prismatic carbide drill bits. – 400-600 rpm
Cost
$710.00 plus shipping
To Order: Email Rob@rgandassoc.com or Fax to 866-251-9079
